AireRyder LK51213OBB Manuel d'instructions télécharger pdf

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless

additional support is provided for the fan.

LK51213

1. Remove the switch box cover from the switch

box of the fan by loosing the three switch box

screws.

2. Unscrew the center plug from the switch box

cover and discard it.

3. Thread the fixture wire through the switch box

cover.

4. Attach the switch box cover to the light kit, then

secure it with a washer and hex nut.

5. Thread the pull chain through a hex nut and the

short nipple. Screw the short nipple into the

coupling and secure it with a hex nut.

6. Cut the redundant wires if necessary. Pull out

the wires from the switch box. Make wire

connections using the wire nuts:

---The black wire from the light kit to the black

(or blue) wire from the switch box.

---The white wire from the light kit to the white

wire from the switch box.

Carefully put the wires back into the switch box.

7. Attach the switch box cover back to the switch box

using the three switch box screws.

8. Install bulbs (included). See relamping label at socket

area or packaging for maximum allowed wattage.

9. Slip the glass shade up through the pull chain and the short nipple, secure them with a rubber

pad, metal pad and hex nut.

10. Slip the cover up through the pull chain and the short nipple, secure it with finial.

11. Turn on the power at the main fuse or circuit breaker box.

(You can control the light with the pull chain)

Center Plug

Black Wire

Wire Nut

Black or Blue Wire

White Wire

Switch Box

Motor

Hex Nut & Washer

Stem

Switch Box Cover

Switch Box Screw

For Light Kit:

LK51213 --- Page 1

Light Kit

Hex Nut

Rubber Pad

Metal Pad

Cover

Finial

Short Nipple

Glass Shade

Pull Chain

Hex Nut

Coupling

E26 medium base spiral

fluorescent Bulb

(Max.13W, incluced)

090406

F A N C OF A N C O

1 2

Résumé du contenu

Page 1 - INSTRUCTIONS

ASSEMBLY AND INSTALLATION INSTRUCTIONSWARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUITBREAKER BOX BEFORE INSTALLING OR

Page 2 - For Semi-Flush

1. Take out the parts from the hardware package For Semi-Flush. 2. Attach two screws to the mounting strap, and secure it with two lock nuts.

Commentaires sur ces manuels

Pas de commentaire

AireRyder LK51213OBB Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Ventilateurs des ménages AireRyder LK51213OBB. AireRyder LK51213OBB Instructions / Assembly Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs des ménages AireRyder LK51213OBB