Turn off the electric power at the main
fuse or circuit breaker box.
PAGE: 1 / 3
Hang the fan on the hanger bracket,
and make sure the slot of the hanger
ball is positioned onto the chip of the
hanger bracket exactly.
Fig.1.
Fig.6.
Chip
Slot
Downrod
Downrod
Housing
Insert the hanger pin through the
holes in the collar and downrod.
Insert the lock pin through the hole
near the end of the hanger pin until
it snaps into its locked position.
Finally, tighten downrod screws on
the top of the fan motor.
Fig.4.
Insert the motor wires through the
cap, canopy and downrod.
Fig.3.
Tighten the hanger bracket to the
outlet box with 2 mounting screws.
(To reduce the risk of fire, electric
shock, or personal injury, mount it to
the outlet box marked "Acceptable for
fan support" and use mounting screws
provided with the outlet box.)
Fig.2.
Attach the cap onto the housing to
cover the collar.
Fig.5.
Cap
Canopy
Cap
Collar
Hanger Pin
Lock Pin
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER BEFORE
INSTALLING OR SERVICING THIS FIXTURE.
CAUTION: TO REDUCE THE RISK OF INJURY TO PERSONS, INSTALL FAN SO THAT
THE BLADE IS AT LEAST 2.1 METERS (7 FEET) ABOVE THE FLOOR.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT
TO OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
THIS INSTALLATION IS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL
CODE AND LOCAL CODES.
THIS FAN MUST BE INSTALLED WITH WALL CONTROL/SWITCH.
READ AND SAVE THESE INSTRUCTIONS.
NOTE: 1. TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE BRACKETS WHEN INSTALLING
THE BRACKETS, BALANCING THE BLADES, OR CLEANING THE FAN, DO NOT INSERT FOREIGN OBJECTS
IN BETWEEN ROTATING FAN BLADES.
2. IF A STATIONARY APPLIANCE IS NOT PROVIDED WITH A SUPPLY CORD AND A PLUG, OR WITH OTHER
MEANS FOR DISCONNECTION FROM THE SUPPLY MAINS HAVING A CONTACT SEPARATION OF AT
LEAST 3 MM IN ALL POLES, THAT MEANS FOR DISCONNECTION MUST BE INCORPORATED IN THE FIXED
WIRING IN ACCORDANCE WITH THE WIRING RULES.
3. THE FAN WEIGHT IS 10.3 KGS(22.89LBS).
4. ALL SET SCREWS OF THE FAN MUST BE CHECKED AND RETIGHTENED WHERE NECESSARY BEFORE
INSTALLATION.
060220
TM
Installation Steps :
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN
DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
THIS FAN MUST BE INSTALLED WITH A WALL CONTROL/SWITCH.
SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 22.89 lb (10.3 kg). Be sure the outlet box you are using is securely attached to the building
structure and and support the full weight of the fan. Failure to do so can result in serious injury.
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels